Exterior Silicone Emulsion

/Exterior Silicone Emulsion
Exterior Silicone Emulsion

Category:

A special product for special coating based on acrylic binder with high tolerance for climate conditions and high adhesion on concrete, bricks, plaster, wood, rendering and other wall surfaces (external). silicone additive is adding to isolate external walls from rain and other climate conditions (water proof), The final appearance is smooth finish with matt gloss. It can be washed easily by water and soap.

FINISH :  matt
COLOUR  :  AS per colour card
SOILD CONTENT :  58 % ±2
SOLID VOLUME  :   38 % ±2
SPREADING RATE :  20-25 m2 per US gallon   depending on the substrate
DRYING TIME  :  2-3 hours
RECOATING INTERVAL :  It can be recoat after 5 hours
S.G   :  1.55 g/cm3
PH  : 8.0-8.5

 

 

 

Details
  • USES
  •  It recommended for external concrete,wood, bricks, plaster   surfaces
  •  PREPARATION
  • Surface must be well cleaned, free dirt, grease and oils, remove loss scalings
  • PRECEDING COATS
  •  Surface should be primed with  Nova priming sealer, then it takes one  or two coats  of wall putty then it can be painted with  Nova super acrylic emulsion
  • THINNING
  • It can be thinned with clean water
  • 20-   25% for first coat
  • 10-15 % for second coat
  • METHOD OF APPLICACTION 
  • Brush, roller,spraygun
  • PACKING
  • 1 US gallon or  Drum 18 liter
  • INGREDIENTS
  • pva, pigments, fillers, preservatives, solvent (water)
  • All equipments should be rinsed with water immediately after use
   

Related Products