Asli Exterior Silicony Emulsion

/Asli Exterior Silicony Emulsion
Asli Exterior Silicony Emulsion

Category:

A special product for special coating based on acrylic binder with high tolerance for climatic conditions and high adhesion on concrete, bricks, plaster, wood, rendering and other wall surfaces (internal & external). The final appearance is smooth finish with matt gloss rain, wind, sunrays and It is beautiful, guards the surface from other climatic conditions .
It can be washed easily by water and soap it has silicone additive which gives more resistance against water (water repelliant) .

  • FINISH: matt
  • COLOUR :As per colour card
  • SOILD CONTENT : 58 % ±2
  • SOLID VOLUME : 38 % ±2
  • SPREADING RATE: 20-25 m2 per US gallon depending on substrate
  • DRYING TIME : 2-3 hours
  • RECOATING INTERVAL : It can be recoat after 5 hours
  • S . G:  1.55g/cm3
  • PH: 8.0-8.5
Details
  • USES
  • It recommended for external concrete, wood,bricks,plaster surfaces
  • PREPARATION
  • Surface must be well cleaned,free of dirt, grease and oils, remove loss scalings
  • PRECEDING COATS
  • Surface should be primed with Asli priming sealer ,then it takes one or two coats of wall putty then it can be painted with Asli exterior silicony emulsion
  • METHOD OF APPLICACTION
  •  Brush, roller,spraygun
  • PACKING
  • 1 US gallon or Drum 18 liter
  • THINNING
  •   It can be thinned with clean water
  • 20-25% for first coat
  • 10-15 % for second coat
  • STORAGE
  • The product must be stored in accordance with national regulations.Storage conditions are to keep the container in dry,cool,wel ventilated space and away from sources Of heat and ignition. Containers must be kept tighty closed.
  • HANDLING
  • Handle with care,stir well before use.
  • HEALTH AND SAFETY
  • Please observe the precautionary notices on the container Use under well ventilated conditions. Aviod skin contact.Spilage on the skin should immediately be removed with suitable cleaner,soap and water. Eyes should be wel flushed with water and medical attention sought immediately For details information on the health and safety hazards and precautions for use of this product,we refer to the Material Safety Data Sheet.
  • INGREDIENTS
  •  pva,pigments,fillers,preservatives,solvent (water)
  • VALIDITY
  • Two years from date of production
  • All equipments should be rinsed with water immediately after use

Related Products