Mercury Emulsion
Category: Interior Paints
Murcury emulsion is an acrylic base paint without shines used for internal walls and ceilings. It has high coverage and it is featuring a high resistance for water, temperature, and sunshine. Also, it has resistance to Bacteria and Fungi. It is washable with water and soap.
Physical and Technical properties
- Solids by weight = 60%
- Density = 1.58 g/cm
- Coverage range = (65-75)m2 for barell based on the surface nature.
- Dilution: diluted by water (20-25)% for the first face and (10-15)% for the second one.
- Solids by volume = 50%
- PH = 8-8.5
- Drying: (2-3) hours and ability to apply the second face after 5 hours.
Details
- Uses
- The surface should be clean free oils and dirt, and remove all old paint residues. After base using resins basement. Advices use this emulsion inside and outside for cement walls, woods and block.
- Ingredients
- Colored material as Titanium Dioxide, fillers as Calcium Carbonate, coalescing agents as Talc, water as solvents, dispersers, antifoam, acticide, perfumes and binders as resins.
- Tools
- Brush, roll, spraying gun
